PVC Insulated and Sheathed Conductor Control Cables 0.6/1kV

IiCables ze-PVC eziKhuselekileyo kunye ne-Sheathed Conductor Control 0.6 / 1kV

Iintambo ezininzi eziziintambo zobhedu, i-PVC egqunyiweyo, i-armored okanye i-unarmoured kunye ne-PVC egubungeleyo. Iintambo zilinganiswe nge-0.6 / 1 KV kwaye zihambelana ne-IEC: 502.

QHAGAMSHELANA NGOKU PDF Khuphela

Iinkcukacha

Iithegi

Iinkcukacha zemveliso cable tv providers

Ukwakhiwa

Conductor:Plain circular solid or stranded copper, per IEC:228, class 1 and 2 - sizes: 1.5 mm2, 2.5 mm2 and 4 mm2

Insulation: Heat resistive PVC type 5 to BS:6746 rated 85°C for continuous operation (PVC type 1 to BS:6746 rated 70°C also available)

Assembly & Filling

For armoured cables

Insulated cores are laid up together and filled with non-hygroscopic material to form compact and circular cable. Armour bedding shall be an extruded layer of PVC which may be an integral part of the filling.

For unarmoured cables

Insulated conductors are laid up together and provided with lapped or extruded inner covering.

Isikrweqe

Galvanized steel tapes or round steel wires.

Isingxobo

PVC type ST2 to IEC:502 colour black. Flame retardant PVC is also available upon request.

Core identification

Black with white printed numbers 1,2,3...etc.

Standard number of cores

7, 12, 19, 24, 30, 37. Different number of cores are available on request.

Application: These cables are suitable for use in a broad range of commercial, in industrial and utility applications where maximum performance will be demanded and may be installed indoors, outdoors, underground, ducts (conduits), on trays or ladders.

Ukuba unomdla kwiimveliso zethu, unokukhetha ukushiya ulwazi lwakho apha, kwaye siya kuqhagamshelana nawe kungekudala.