PVC Insulated and Sheathed Conductor Control Cables 0.6/1kV

Kejbils tal-Kontroll tal-Konduttur iżolati u miksi bil-PVC 0.6/1kV

Kejbils b'ħafna qalba b'kondutturi tar-ram, PVC iżolati, armati jew mhux armati u PVC miksi. Il-kejbils huma kklassifikati 0.6/1 KV u jikkonformaw ma 'IEC:502.

IKKUNTATTA ISSA PDF Download

Dettalji

Tikketti

Dettalji tal-prodott cable tv providers

Kostruzzjoni

Conductor:Plain circular solid or stranded copper, per IEC:228, class 1 and 2 - sizes: 1.5 mm2, 2.5 mm2 and 4 mm2

Insulation: Heat resistive PVC type 5 to BS:6746 rated 85°C for continuous operation (PVC type 1 to BS:6746 rated 70°C also available)

Assembly & Filling

For armoured cables

Insulated cores are laid up together and filled with non-hygroscopic material to form compact and circular cable. Armour bedding shall be an extruded layer of PVC which may be an integral part of the filling.

For unarmoured cables

Insulated conductors are laid up together and provided with lapped or extruded inner covering.

Armor

Galvanized steel tapes or round steel wires.

għant

PVC type ST2 to IEC:502 colour black. Flame retardant PVC is also available upon request.

Core identification

Black with white printed numbers 1,2,3...etc.

Standard number of cores

7, 12, 19, 24, 30, 37. Different number of cores are available on request.

Application: These cables are suitable for use in a broad range of commercial, in industrial and utility applications where maximum performance will be demanded and may be installed indoors, outdoors, underground, ducts (conduits), on trays or ladders.

Jekk inti interessat fil-prodotti tagħna, tista 'tagħżel li tħalli l-informazzjoni tiegħek hawn, u aħna ser inkunu f'kuntatt miegħek dalwaqt.