PVC Insulated and Sheathed Conductor Control Cables 0.6/1kV

Ko nga taura maha-matua me nga kaikawe parahi, he mea whakamahana PVC, he mea patu, he kore patu ranei me te PVC pukoro. Ka whakatauhia nga taura 0.6/1 KV ka rite ki te IEC:502.

WHAKAPAKI NEI Tikiake PDF

Nga korero

Tohu

Taipitopito hua cable tv providers

Hangahanga

Conductor:Plain circular solid or stranded copper, per IEC:228, class 1 and 2 - sizes: 1.5 mm2, 2.5 mm2 and 4 mm2

Insulation: Heat resistive PVC type 5 to BS:6746 rated 85°C for continuous operation (PVC type 1 to BS:6746 rated 70°C also available)

Assembly & Filling

For armoured cables

Insulated cores are laid up together and filled with non-hygroscopic material to form compact and circular cable. Armour bedding shall be an extruded layer of PVC which may be an integral part of the filling.

For unarmoured cables

Insulated conductors are laid up together and provided with lapped or extruded inner covering.

Haana

Galvanized steel tapes or round steel wires.

Pukoro

PVC type ST2 to IEC:502 colour black. Flame retardant PVC is also available upon request.

Core identification

Black with white printed numbers 1,2,3...etc.

Standard number of cores

7, 12, 19, 24, 30, 37. Different number of cores are available on request.

Application: These cables are suitable for use in a broad range of commercial, in industrial and utility applications where maximum performance will be demanded and may be installed indoors, outdoors, underground, ducts (conduits), on trays or ladders.

Mena kei te pirangi koe ki a maatau hua, ka taea e koe te kowhiri ki te waiho i o korero ki konei, a ka tata tonu te korero ki a koe.