A grooved end butterfly valve suits piping projects built around grooved connections and actuator integration. This guide explains the connection, interface, materials, size limit, and key dimensions of our valve so you can match the selection to your line layout before requesting a quotation.
Choose a grooved end butterfly valve when the piping layout is designed for grooved connections. Our valve uses groove ends to AWWA C606 and has a face-to-face dimension built to ASME B16.10. Check that the pipe connection matches the selected grooved system, then check the valve length against the straight run around the valve.
The valve is designed and manufactured to MSS SP-67. Its top flange dimensions follow ISO 5211, so review the actuator interface against that flange before you finalize an automated or manually operated arrangement. Include the connection method, nominal diameter, and actuator interface requirement in the sizing request.
The Grooved End Butterfly Valve is sized up to 12\". The dimensional schedule below gives the nominal diameter and main installation dimensions. Use the DN and L values to check the valve against the pipe run, coupling arrangement, and neighboring equipment. Every dimensional value in the schedule is in millimeters.
| DN | H1 (mm) | H2 (mm) | H3 (mm) | L (mm) | A (mm) | B (mm) |
|---|---|---|---|---|---|---|
| 50 | 74 | 121 | 30 | 90 | 67 | 51 |
| 65 | 74 | 126 | 30 | 97 | 73 | 62.5 |
| 80 | 89 | 132 | 30 | 97 | 97 | 77 |
| 100 | 94 | 148.7 | 30 | 116 | 122.5 | 102 |
| 125 | 108 | 172 | 30 | 134 | 141.3 | 126 |
| 150 | 123 | 183 | 30 | 134 | 175 | 150 |
| 200 | 149 | 205 | 41 | 148 | 232 | 202 |
| 250 | 186 | 250 | 41 | 160 | 286 | 253 |
| 300 | 213 | 275 | 41 | 166 | 336.5 | 303 |
Check H1, H2, and H3 against the space above and around the valve. Check A and B against the actuator or operating clearance in your installation. If your project uses a size beyond the table, include the required DN in the purchase inquiry before the specification is closed.
Our valve uses ductile iron for the body, identified as ASTM A536. The disc is ductile iron with ASTM A536 and EPDM. The bushing is PTFE or AI Bronze, and the stem is stainless steel.
Match the body and disc materials to the service requirements, then identify the required bushing option. Include the stem material in the component schedule so the supplied configuration matches the project requirement.
Nominal diameter is one part of the selection. The connection standard, top flange interface, face-to-face length, clearance, and material configuration also affect whether the valve fits your piping package.
Testing and inspection follow API 598. Include that requirement in the valve schedule when your project uses this product. Keep the design and connection references aligned across the piping package: MSS SP-67 for design and manufacture, AWWA C606 for the groove end, ISO 5211 for the top flange, and ASME B16.10 for face-to-face dimensions.
Our advice
Choose this valve when the line uses grooved connections and the available space can accommodate the listed DN, face-to-face, height, and clearance dimensions. Review the body, disc, bushing, and stem materials against the project specification, and include API 598 testing and inspection in the purchase requirement. The product suits a fit and ordering check based on connection, dimensions, materials, and inspection requirements.
What to weigh
Your shortlist
DN 200, DN 250, and DN 300 use an H3 dimension of 41 mm. Use that value when checking the relevant installation space for those sizes. The smaller listed sizes use an H3 dimension of 30 mm, so the clearance check should follow the DN selected for the line.
DN 65 and DN 80 share an L dimension of 97 mm. That value is the face-to-face installation length in the dimensional schedule. If either nominal diameter matches the line, use the corresponding H1, H2, H3, A, and B values as separate clearance checks.
DN 300 has an A dimension of 336.5 mm. Use this value when reviewing the operating or actuator clearance for that nominal diameter. The same row lists B as 303 mm, H1 as 213 mm, H2 as 275 mm, H3 as 41 mm, and L as 166 mm.
Our Grooved End Butterfly Valve fits a project that requires grooved ends to AWWA C606, an ISO 5211 top flange, ASME B16.10 face-to-face dimensions, and a size up to 12\". It suits a purchase package where the pipe size, clearance, materials, and testing requirement are coordinated. Send the required DN, connection arrangement, and material configuration for a quotation review.
The company
Hebei Honest Industrial Group Co., Ltd. is a professional manufacturer and supplier of industrial valves and accessories, wires and cables. As a group company, we are committed to developing long-term cooperative relationships with customers and continuously improving our production processes and processing technologies.…
About Us ↗Visit company website ↗